As a homeowner, it’s important to pay attention to the performance of your furnace to make sure it is continuing to get the job done properly every day. You don’t have to be an expert in HVAC equipment to do your part in this matter. Just knowing what to pay attention to – like watching for signs of furnace short cycling – can go a long way. Then, when an issue does arise, you can call in the experts for help.

Those experts are the professionals at Berico. Offering the best HVAC repair Eden has to offer, and for excellent prices, Berico will always impress no matter what project is at hand. Call today to get started.

 

What is Short Cycling?

The term “short cycling” refers to a situation in which your furnace is turning on and off more frequently than it should. Furnaces are designed to complete a full heating cycle each time they kick on, which is the most efficient and effective way for them to work. If you notice that the system seems to be going on and off more often than it used to, short cycling is taking place and there are a number of potential causes to consider.

 

Start with the Air Filter

One of the easiest places to begin looking for a cause of short cycling is with the air filter. If it has been a while since you replaced the air filter in your furnace, it may be clogged up and restricting the airflow through the system. This will lead the furnace to overheat, and it will shut itself down as a result. Obviously, the fix here is to replace your air filter, and that might be all it takes to get back to normal operation.

 

Check the Thermostat

You could also be dealing with problems with your thermostat. If you have had the same thermostat for many years, that old unit might be malfunctioning and giving the system inaccurate readings as a result. When the thermostat readings are off, it can send signals to the furnace to turn on or off more quickly than it would have otherwise. Replacing your thermostat with a modern programmable one is an affordable and easy upgrade.

 

Is Your Furnace the Right Size?

Believe it or not, another potential problem that can lead to short cycling is having a furnace that is too big for your home. With a large furnace, you’ll have more heating power than you need, and the spaces might get warm before the heating cycle has had a chance to finish. This is why it’s important to work with a proven HVAC contractor to install a new furnace to make sure the unit you have installed is the right size for your property.

Do you need Eden heating repair that will get the job done properly without breaking the bank? Berico is the answer, and you can place a phone call now to ask any questions you may have or schedule your first appointment. It’s always important to work with a qualified HVAC contractor and they don’t get any better than Berico!

There are two primary types of HVAC systems – ducted systems and ductless mini splits. This article will explain the difference and highlight the benefits that you can enjoy if you opt for the ductless version.

 

For any type of Greensboro HVAC work that you need to have completed, be sure to make Berico your first call. With a history that dates back a century and thousands of happy customers throughout the region, you’ll never go wrong with Berico.

 

What is a Ductless Mini Split System?

First, it’s important to get on the same page regarding the definition of a ductless mini split system. A traditional HVAC system operates by using air ducts that run throughout a building to carry heated or cooled air to the various rooms. This system works great but is obviously only possible when ducts are in place.

 

For buildings without ducts, a ductless mini split system is an excellent solution. The system features an outdoor compressor unit that is connected to one or more indoor air-handling units that are mounted on walls or ceilings.

 

Enjoy Four Big Benefits

So, what are the benefits of opting for a mini split system instead of the traditional HVAC approach using ducts to carry air? Here are four notable advantages –

 

• Energy efficiency. As heated or cooled air travels through ducts, it loses some of the heating or cooling that it has been provided, meaning the energy that was used in the system is partially wasted. Mini splits are more efficient because the air that is cooled or heated doesn’t pass through ducts. Also, you can more easily control which rooms in the house are being heated or cooled, so you don’t have to waste energy in spaces that aren’t being used.

 

• Easy installation. If your building doesn’t have ducts, you would have to go through an expensive and time-consuming process to add those ducts before a traditional HVAC system could be installed. With a mini split, that part of the job is eliminated, meaning the timeline can be shorter and the total cost can be reduced.

 

• Quiet operation. Some traditional HVAC systems can be rather noisy as they run, but mini splits tend to be extremely quiet. This is a nice feature, especially in places like bedrooms where the system might need to run frequently on a hot summer night to keep you cool.

 

• Effective all year long. You can opt for a mini split system that functions both as a heater and air conditioner, so you’ll be able to dial in the right temperature no matter what season it is in the Greensboro area.

 

Using a ductless mini split system can be an excellent way to keep your home or business comfortable throughout the year. If you need any AC repair to get your system back to working correctly – or if you need any other type of HVAC repair performed – reach out to Berico and schedule an appointment today.

Deciding when to replace a furnace is one of the trickier questions that homeowners face while maintaining their properties. On the one hand, if a furnace seems to be working fine, why replace it? There is obviously a cost that is associated with that purchase. At the same time, you may suspect that your 20-year-old unit is no longer as effective or efficient as it once was. This post will look at this important question and help you come to a confident answer.

If you have a Greensboro furnace that may be on its last legs, or if you just want to explore your options, take a moment today to check in with the Berico team. Leaders in HVAC repair and installation throughout the Greensboro area, Berico will never let you down.

 

The End is Near

Even if your furnace is still running when it hits the 20-year mark, you can be sure that the useful life of this piece of equipment has just about ended. Most furnaces will be able to perform well for around 10 to 20 years, so if you have already gotten 20 years out of yours, consider yourself lucky and start to plan for what is next.

You’ll likely start to notice some issues with the performance of your old furnace if you look closely. Specifically, you may see that your utility bills have started to climb as the furnace gets less efficient and starts to use more fuel. At the same time, it probably won’t be able to achieve the same type of heating performance as when it was younger, meaning you will be paying more and not even getting the results you need.

 

New Furnaces Offer Plenty of Advantages

Obviously, the cost of a new furnace will be your primary concern when considering this upgrade, but you should know that you stand to gain significantly in a number of areas when you make the move. For one thing, new furnaces are much more efficient than models from a couple of decades ago, so you will use significantly less energy to keep your house warm day after day.

The reliability of a new furnace is also a great selling point. A new furnace can be expected to perform reliably for years to come, and even if a problem does come up along the way, you will have warranty coverage in place that may pay for some or all of the needed repairs. Soon enough, you’ll come to see the investment in a new furnace as a smart move that you maybe should have made a few years ago.

When the calls for furnace repair start to add up and you notice that the time between those repairs keeps getting shorter, it may be time for a replacement. Fortunately, you can work with Berico to decide if your furnace should be replaced, and what modern unit is the best choice for the job. Get started today to enjoy better heating than you have in years!

Your furnace works tirelessly throughout the winter to keep your Greensboro home warm and comfortable. However, like any mechanical system, it has a lifespan. Over time, even the most well-maintained furnace will experience decreased efficiency and increased wear and tear. Recognizing the signs that it’s time for a replacement can save you from unexpected breakdowns, costly repairs, and higher energy bills. In this post, we’ll explore some key indicators that it might be time to invest in a new, more efficient furnace.

To work with a proven Greensboro HVAC contractor on the potential upgrade to a new furnace, take a moment now to reach out to the experienced Berico team. Everything from furnace repair to new furnace installation can be handled by the friendly, talented pros and Berico.

 

Use Age as a Guideline

While the age of your furnace isn’t an absolute answer to the question of whether or not you need to upgrade to a new unit, it is a starting point. Generally speaking, you can expect to get 10 to 20 years of service out of a furnace under normal conditions. So, if yours is reaching that point, it’s probably about time to make the switch. With that said, there are other factors that need to be considered, such as those discussed below.

 

Watch for Frequent Breakdowns

It’s not a big deal if you have one thing go wrong with your furnace and you have to have a repair completed by the Berico team. However, if those breakdowns keep happening – and they get more and more frequent – you should start thinking about just replacing the furnace instead. After all, every dollar that is spent repairing the old furnace is a dollar that could have gone toward purchasing the new one.

 

Track Your Energy Consumption

An aging furnace is going to get less and less efficient as time passes, and it will consume more energy as a result. So, a good way to see how your furnace is going is to keep track of your energy consumption on your utility bill from month to month. For example, find your bill from a month last winter and compare it to how much energy you used during a month this winter. Has consumption gone up significantly? When you upgrade to a new model, you’ll find that you use far less energy, meaning your utility costs will go down, and those savings will somewhat offset the cost of the furnace.

 

Listen As the Furnace Runs

One other way to determine if your furnace needs to be replaced is by listening to what it sounds like as it runs. A properly functioning furnace will be relatively quiet, and the noise it produces will be steady. On the other hand, when a furnace is nearing the end of its useful life, it’s likely that there will be some strange, loud noises produced from time to time. Consider those noises a sign that you should replace the unit soon.

Teaming up with the right heating and air contractors is fundamental to your comfort in and around the Greensboro area. Make sure your system is living up to its potential by connecting with Berico today and learning more about the many services that are available. You’ll be in good hands from the start!

If you have been looking for ways to make your home more eco-friendly, assessing your plumbing system is a step that should be carefully considered. There are plenty of ways to cut down on water consumption in a modern home, which will make that home more eco-friendly along the way (and save you some money on your water bill).

Of course, you’ll want to work with qualified Greensboro plumbers for any of these kinds of projects, and Berico is the right team for that job. Whether it’s green plumbing or any other type of job that you need to have completed, make sure Berico is your first call.

 

Start with Low-Flow Fixtures

Without a doubt, the easiest way to get into the world of eco-friendly plumbing is to add low-flow fixtures in various places throughout the house. As the name suggests, these fixtures reduce the flow of water while they are being used, yet they still get the job done effectively.

This approach can be used in many different places, including toilets, faucets, and showerheads. For example, you could get a low-flow showerhead that only uses 50% of the water used by a traditional model. That might not sound like much over the course of one or two showers, but when you think about how much water your family uses in the shower over a full year, it becomes clear how significant the savings can be.

 

Add Smart Leak Detectors

Cutting down on how much water you use by upgrading your fixtures is a great step, but you also need to make sure that you aren’t wasting any water due to leaks somewhere in the system. This is where smart leak detectors are such a wise addition to a plumbing system.

These can be placed in various locations that might be prone to leaks, and they will alert you that a leak has occurred, so a fix can be applied. Since many of your plumbing components are out of sight during day-to-day life, a leak sensor is an ally that will prevent any problem from spiraling out of control.

 

Consider a Tankless Water Heater

Another big step in the right direction is making the switch from a traditional water heater – with a tank – and a tankless model. With a traditional unit, your water heater is constantly holding a large volume of water at an elevated temperature, whether you need it or not. This is obviously inefficient, as you could go extended periods without using your hot water and energy would have been used all along the way.

Tankless water heaters work on an on-demand model. There is no hot water being held in a tank, and only when you turn on a hot tap somewhere in the house will the water move through the heater and make its way to you. This virtually eliminates the wasted energy in the system, and as a bonus, tankless units are compact and won’t waste valuable space somewhere in your home.

Which of these eco-friendly plumbing upgrades will make the most sense for your home? Whether you just pick one to get started, or you want to take on all of them at once, Berico is here to take on any plumbing repair or installation projects you have in mind. Get in touch now to schedule an appointment!