Modern plumbing systems are incredibly reliable. You probably don’t think much about how your system is working behind the scenes, so to speak, but for the most part, it just gets the job done, and you move on with your life. So, when something comes up that isn’t working as it should, it’s rather surprising, and you might not know what to do next.
To help you understand how plumbing works and what can go wrong, this page is going to discuss some of the most common problems that are likely to pop up in your home. Of course, simply understanding the problem is only half the battle, as it will still need to be solved so you can use your system properly once again. For that, the Greensboro plumbers at Berico are your best bet. For clogged drains, dripping faucets, and other plumbing issues, Berico is always the right call.
Clogged Drains Lead the Way
If you start to count them up, you might be surprised to find how many drains are actually in your home. They have a pretty simple job to do – take used water away and funnel it out to the sewer line– but they can’t get that job done if they are clogged up.
Sometimes, a clogged drain is the result of someone in the home. If you put something down the drain that shouldn’t be there, it can clog it up quickly and make it impossible for water to pass. In other cases, a clogged drain will be the result of buildup in the pipe over time that gradually narrows it to the point that it doesn’t work any longer. Or another problem can arise when roots clog up the line.
Leaking Pipes Plague Older Buildings
Another common problem is leaking pipes, although this tends to be more of an issue in older homes as compared to new construction. The materials formerly used to manufacture pipes were prone to corrosion, and they could eventually fail as a result. Modern pipes are much less likely to leak thanks to their advanced materials, but nothing is perfect, and a leak is always a possibility.
It’s a good idea to pay attention to any signs of a leak in your pipes, such as a higher than usual water bill or odd stains on your walls or ceilings. Acting quickly is the best way to limit the damage that a leaking pipe can cause.
Are Your Toilets Constantly Running?
This is one of those problems that doesn’t seem like more than a minor annoyance until you take a look at your utility bill at the end of the month. A surprising amount of water can be wasted by a toilet that is just slightly running throughout the day and night. If you hear one or more of your toilets running when it isn’t being used, that’s an issue that should be attended to promptly.
It is commonly the flapper valve in your toilet tank that is to blame for the water running constantly. In many cases, just replacing that valve with a new one will be enough to rectify the situation.
Dripping Faucets Is a Frustrating Issue
When you turn the handle of your faucet into the “Off” position, you expect the water to stop flowing. But what happens when it doesn’t? This is a frustrating issue that, just like the running toilet, can waste a lot of water.
For those with some basic DIY skills, fixing such a problem is usually pretty straightforward. Replacing the washer or O-ring in the faucet will usually bring the dripping to a stop. If not, it might be time for either professional help or the installation of a new faucet.
Low Water Pressure is Often a Symptom
One common problem with a plumbing system is low water pressure, but this is usually a sign that something else is wrong, rather than being the problem itself. For example, if you have a leak in one of your pipes, some of the water pressure will be lost to that leak, and the force of the water coming out of your faucet or showerhead may be compromised.
As a starting point to get to the bottom of this problem, you can test all of the fixtures in the home to see if they are all affected or if the issue is isolated to one area. If the root cause of the low water pressure is a serious plumbing issue, you’ll want to get help from Berico right away to get back on track.
A Burst Pipe is a Plumbing Emergency
Some of the issues highlighted so far – dripping faucets and running toilets, for example – need to be fixed but don’t fall into the category of a plumbing emergency. It’s a different story when it comes to a burst pipe. This type of event needs to be taken care of as soon as possible to limit the damage. Start by turning off the main water supply to bring the flooding to a halt, and then get in touch with the pros.
Dealing with Sump Pump Failure
In a home that relies on a sump pump to avoid flooding issues, the failure of that pump is a serious problem. Unfortunately, this is the type of issue that is usually only noticed once the water is flooding the space, so a prompt response is important. Whether it’s a clogged line in the sump pump system, a power failure, or some other problem, it’s important to get it back in working order before flooding leads to major damage.
If you spot signs of leaking pipes in your home, or if the toilet keeps running and you don’t know why, it’s a good idea to act quickly. Rather than letting the problem get worse, call for plumbing repair from Berico immediately. Knowing that the expert team from Berico is on the job will put your mind at ease, and life will get back to normal in short order.
Eco-Friendly Plumbing Upgrades for a Sustainable Home
/in Uncategorized/by William HammerOf course, you’ll want to work with qualified Greensboro plumbers for any of these kinds of projects, and Berico is the right team for that job. Whether it’s green plumbing or any other type of job that you need to have completed, make sure Berico is your first call.
Start with Low-Flow Fixtures
Without a doubt, the easiest way to get into the world of eco-friendly plumbing is to add low-flow fixtures in various places throughout the house. As the name suggests, these fixtures reduce the flow of water while they are being used, yet they still get the job done effectively.
This approach can be used in many different places, including toilets, faucets, and showerheads. For example, you could get a low-flow showerhead that only uses 50% of the water used by a traditional model. That might not sound like much over the course of one or two showers, but when you think about how much water your family uses in the shower over a full year, it becomes clear how significant the savings can be.
Add Smart Leak Detectors
Cutting down on how much water you use by upgrading your fixtures is a great step, but you also need to make sure that you aren’t wasting any water due to leaks somewhere in the system. This is where smart leak detectors are such a wise addition to a plumbing system.
These can be placed in various locations that might be prone to leaks, and they will alert you that a leak has occurred, so a fix can be applied. Since many of your plumbing components are out of sight during day-to-day life, a leak sensor is an ally that will prevent any problem from spiraling out of control.
Consider a Tankless Water Heater
Another big step in the right direction is making the switch from a traditional water heater – with a tank – and a tankless model. With a traditional unit, your water heater is constantly holding a large volume of water at an elevated temperature, whether you need it or not. This is obviously inefficient, as you could go extended periods without using your hot water and energy would have been used all along the way.
Tankless water heaters work on an on-demand model. There is no hot water being held in a tank, and only when you turn on a hot tap somewhere in the house will the water move through the heater and make its way to you. This virtually eliminates the wasted energy in the system, and as a bonus, tankless units are compact and won’t waste valuable space somewhere in your home.
Which of these eco-friendly plumbing upgrades will make the most sense for your home? Whether you just pick one to get started, or you want to take on all of them at once, Berico is here to take on any plumbing repair or installation projects you have in mind. Get in touch now to schedule an appointment!
Can Extreme Cold Cause Furnace Problems?
/in Uncategorized/by William HammerIf you need furnace maintenance from an experienced HVAC contractor with an excellent reputation in the Greensboro area, turn to Berico today. Of course, the Berico team is ready to take on many other projects beyond furnace maintenance, so don’t hesitate to get in touch no matter what job is on the agenda.
It’s About Stress
As a homeowner, you should understand that particularly cold weather is going to put your furnace under a lot of stress. Basically, the conditions outside are demanding the furnace to work harder than usual, and that workload can cause things to break down. Some of the components that may be at risk include the blower motor, the heat exchanger, and the burners.
One way to help reduce the stress on your furnace during extremely cold weather is by ensuring that your home is properly sealed. Check for drafts around windows and doors, as these can allow cold air to enter, forcing your furnace to work harder to maintain a comfortable temperature. Adding weatherstripping or using draft stoppers can help keep the warm air inside and reduce the workload on your heating system. This simple step can make a big difference in your furnace’s efficiency and longevity during a cold snap. Additionally, make sure your furnace filter is clean and clear of debris to ensure optimal airflow and prevent unnecessary strain on the system.
Watch for Airflow Problems
If there is a lot of snow outside, or if some ice has formed around your home, it’s possible that the exterior vents that serve your furnace could be blocked. That will lead to reduced airflow, and again, additional stress on the system. Quickly clearing away these vents to make sure the air can move freely will go a long way toward getting the performance you need without causing the furnace to break down.
Frozen Drain Pipes Are a Concern
Along the same lines as the previous point, you might also find a situation where the condensate drain line that serves your furnace freezes up and can no longer drain water away. This could lead to a problem if the water backs up through the pipe and causes the furnace to shut down. When you know a cold snap is coming, you can install some pipe insulation to keep the line from freezing, or you could just check it periodically during the cold weather and thaw it out to open the line, if necessary.
Have you been searching for “Eden furnace repair near me” without any luck? That search can stop now by calling Berico and getting exactly the type of service you deserve. As soon as you start chatting with the Berico team about your needs, you will know you are in the right hands. Don’t wait any longer!
Plumbing Myths Debunked
/in Uncategorized/by William HammerFor professional help with Greensboro plumbing problems that will ignore the myths and get down to the truth, contact Berico right away for assistance.
A Slow Drain Will Eventually Fix Itself
Some homeowners seem to believe that simply leaving a slow drain alone over time will allow it to “clear itself,” and the problem will go away. Rarely is this going to be the case. The drain is slow because there is a clog in the pipe, and that clog will need to be cleared one way or another. Dealing with this issue as soon as possible is best to avoid more serious problems later on.
You Can Flush Anything Down the Toilet
This is most certainly not true. Just because something technically will fit down the toilet does not mean it should be flushed down the system. Serious problems like major clogs and damage to your pipes can occur when you flush anything other than toilet paper. Sticking with only toilet paper going down the toilet is a great way to protect the health of your overall system and prevent expensive repairs.
All Old Houses Have Bad Plumbing
In the Greensboro area, there are many beautiful old homes that have been in place for a century or longer. So, are all of these houses destined to deal with ongoing plumbing problems? Not at all. With proper maintenance and timely repair when something does go wrong, an older home can enjoy reliable plumbing performance with no end in sight.
Plumbing Fixtures Don’t Need Maintenance
You should always be wary when you hear that something doesn’t need any maintenance at all. That’s just not how life tends to work – even the best parts and systems wear out and require attention at one point or another. If you tend to your plumbing system just like you tend to anything else in or around your house, you’ll be rewarded in the long run.
Drain Cleaners Are a Great Solution
In some cases, a drain cleaner will actually be able to improve the performance of that drain – but you’ll be doing some lasting harm along the way. The chemicals that are used in drain cleaners can be very harmful and will erode your pipes over time. Instead, opt for mechanical methods of removing a clog, such as a plunger. If needed, get help from a professional plumber to make sure the work is done correctly.
The great thing about working with Berico is that you’ll be able to have all of your plumbing problems solved quickly and easily by one expert team. Whether it’s a running toilet, kitchen plumbing issues, or anything else, you’ll be in the right hands from the start. Get in touch now to learn more.
Is Propane Getting More Expensive?
/in Uncategorized/by William HammerTo work with a Greensboro propane supply company that you can trust to always deliver on time and for a fair price, call Berico as soon as possible. As a propane supplier, Berico has a long and respected history in the Greensboro area, and you’ll be in the good company of many friends and neighbors that rely on Berico for their “Always Dependable” service.
A Steady Energy Source
There are price fluctuations in the propane market just like any other market. Propane is purchased and sold like anything else, and based on supply and demand – along with other economic factors – the price will move up and down. With that said, if you look at the historical trends in the price movement of propane, you’ll see an encouraging chart that indicates rather predictable pricing.
Picking out a couple of historical data points is a handy way to understand just how steady propane prices can be. According to the U.S. Energy Information Administration, the price of propane in March of 2024 was $2.56 per gallon. If you go all the way back to March of 2008 – a full 16 years ago – the price was $2.60 per gallon. Of course, that price has moved around in between those two points, but those snapshots show just how flat the overall trend is for propane pricing.
Many Other Reasons to Like Propane
When choosing a fuel as an energy source for your home, picking something that is going to have a steady price over time is a great starting point. But that’s not the only thing to think about. As you take a closer look at some of the other factors, you’ll see that propane scores well across the board.
For example, propane is a very efficient fuel, meaning you will get a lot of value for your money in terms of performance. Also, that efficiency means propane is kind to the environment, which might be something that is personally important to you while making this choice. There is also the matter of safety to consider. Propane is very safe, especially when you partner with a team like Berico to handle all aspects of your system. If you have had any worries in the past about keeping a tank of propane on your property to run your systems, you can set those thoughts to the side – propane is known to be a very safe option and is one worth your consideration.
Ready to set up propane delivery service that won’t let you down? Berico is the easy pick, and you can get started by calling directly or reaching out through the website. Either way, you’ll be getting consistent propane service before you know it!
Should You Cover Your AC Unit in Winter?
/in Uncategorized/by William HammerOf course, when summer turns to fall, the days you need the air conditioning unit to run gradually decrease, and eventually its job is done for the year. When your AC is not needed, should you cover the outdoor unit to protect it? The answer is below.
When you need to work with the leading company for the best AC repair Greensboro has to offer, pick up the phone and call Berico right away. A leading HVAC contractor in the area for decades, Berico will always deliver.
A Sound Idea
There is some merit to the thinking of covering your AC in the winter months, at least on the surface. It’s always possible that some rough weather will come in during the winter, and cold overnight temperatures are assured. So, wouldn’t it be a good idea to cover your AC unit and protect it as much as possible?
In some situations, the answer could be yes. For example, if you have some large trees on your property that drop all of their leaves each fall, covering your AC could keep all of that debris from piling up on and in the unit, eliminating the need to clean it out again in the spring. That would be a nice benefit if it plays out that way, and given the modest cost of an AC cover, it could be all the motivation you need to take this approach.
Two Important Points
If you are going to use an AC cover – which is certainly not a requirement but more of an optional step – there are two things to keep in mind. The first is that you should shut down the power to the system before you add the cover. The last thing you want is to have the system kick on unexpectedly while the cover is on, so make sure there is no power available to confirm that nothing is going to happen that can cause damage.
Along those same lines, you’ll need to confirm that you have taken the cover off in the spring before you power things back up and run it once again. For example, if you move the breaker that controls the AC circuit to the “Off” position during the winter, put a note on that breaker reminding yourself to take the AC cover off before the switch is flipped into the “On” position.
Keeping your HVAC system in proper working order is an important part of being a homeowner, and for that, you need to have the right partner. Berico is not only up to the task of dealing with AC problems but can also manage furnace installation and countless other jobs. Reliable help is just a phone call away!
What Are 5 HVAC Troubleshooting Tips that Every Homeowner Should Know?
/in Uncategorized/by William HammerThis article will dive into five helpful tips that can guide you in determining what the issue may be with your HVAC system and what will be needed to get it back on track. When you are ready to bring in an experienced team to professionally diagnose the issue and provide the necessary repair, reach out to Berico. A proven HVAC contractor with a strong track record in and around Greensboro, you’ll be in good hands when Berico is your chosen partner.
Check the Thermostat
As a starting point for dealing with any kind of HVAC trouble, stop by your thermostat and make sure everything looks as it should. If the batteries have failed, or something has changed about the settings that you didn’t realize, that could be at the heart of the problems you are facing. This is an easy fix in most cases, so it’s a logical place to start.
Replace the Air Filter
Another one of the easy points you can check off is replacing the air filter that serves your system. If you haven’t replaced the filter in a while, it could be clogged up and impacting the performance of your HVAC equipment. Swapping the old one out for a new one is a quick and affordable job that can make a big difference.
Open the Vents
If you don’t feel like your HVAC system is circulating warm or cool air around your home as it should, the problem could be as obvious as some closed vents. Take a moment to walk through the house and confirm that all of the vents are in the open position. While you are doing this, you could also clean off the vent covers to limit how much dust is spread.
Visit Your Breaker Box
When the HVAC system won’t turn on at all, it’s possible that a breaker has been tripped and needs to be reset. Of course, there could be a more serious problem at play, but before you dive into anything else, it’s worthwhile to go to the circuit box and make sure all of the breakers are in the “On” position.
Evaluate the Outdoor Unit
One last tip to keep in mind is that you should check on the condition of your outdoor unit. It’s possible that leaves or other debris have built up around the unit, or that some other issue has caused the unit to stop functioning. Exercise caution around this piece of equipment and always turn to a professional for any repairs that are needed.
When HVAC repair is required, there is only one team that you should trust with the job – Berico. Whether you need the best furnace repair Greensboro has to offer, or there is something else around your home that needs to be taken care of, the Berico team is reliable, timely, and friendly. Take a moment now to get in touch and learn more.
Schedule Service
/in Uncategorized/by William HammerSchedule Service
[si-contact-form form=’23’]]
How Do I Get My Furnace Fan to Run?
/in Uncategorized/by William HammerFor help with any kind of HVAC repair in the Greensboro area, take a moment now to reach out to the team at Berico. With a long list of services and a track record of outstanding performance, Berico is the team you want to have on your side.
Try Some Simple Troubleshooting
If your furnace fan won’t run, the best place to start is with some simple troubleshooting. While it’s possible that something more serious is to blame, you want to rule out the basic stuff first before going any further.
The first stop on this journey is to look at your thermostat settings. If the thermostat is off, for example, nothing is going to run, and you’ll need to start by turning it on. Also, if you have the fan setting on “auto,” the fan is only supposed to run when the furnace itself is running. So, in that case, it is not unusual for the fan not to run continuously. It will only keep running all the time if you have the fan set to “on” at the thermostat.
Another potential solution that would be on the simple side would be a tripped circuit breaker. Of course, a tripped breaker would stop the entire furnace from running, not just the fan. So, if your furnace won’t run, it’s worth a trip to your panel to see if the breaker has been tripped.
Finally, check the status of your air filter. If you have a particularly dirty air filter serving your furnace, the air won’t flow properly through the system, and it could overheat as a result. When that happens, it might shut down to protect itself – getting a new air filter should solve the problem.
Other Issues Need Professional Help
For pretty much anything other than the basic points discussed above, you are going to want to get the help of a licensed professional. There are plenty of other issues that you could be dealing with, like a faulty fan motor or a limit switch problem, but you aren’t going to want to venture toward fixing those issues on your own. Call Berico right away if you need help, and an expert technician can respond to the project.
Repairing your furnace in Greensboro is certainly a core service offered by Berico, but it’s far from all that’s available. Furnace installation is also an option, so you may choose to replace your old system rather than trying to fix it up once again. No matter the HVAC situation you face, the first step is the same – call Berico today and schedule your appointment.
What is the Most Common Problem in a Plumbing System?
/in Uncategorized/by William HammerTo help you understand how plumbing works and what can go wrong, this page is going to discuss some of the most common problems that are likely to pop up in your home. Of course, simply understanding the problem is only half the battle, as it will still need to be solved so you can use your system properly once again. For that, the Greensboro plumbers at Berico are your best bet. For clogged drains, dripping faucets, and other plumbing issues, Berico is always the right call.
Clogged Drains Lead the Way
If you start to count them up, you might be surprised to find how many drains are actually in your home. They have a pretty simple job to do – take used water away and funnel it out to the sewer line– but they can’t get that job done if they are clogged up.
Sometimes, a clogged drain is the result of someone in the home. If you put something down the drain that shouldn’t be there, it can clog it up quickly and make it impossible for water to pass. In other cases, a clogged drain will be the result of buildup in the pipe over time that gradually narrows it to the point that it doesn’t work any longer. Or another problem can arise when roots clog up the line.
Leaking Pipes Plague Older Buildings
Another common problem is leaking pipes, although this tends to be more of an issue in older homes as compared to new construction. The materials formerly used to manufacture pipes were prone to corrosion, and they could eventually fail as a result. Modern pipes are much less likely to leak thanks to their advanced materials, but nothing is perfect, and a leak is always a possibility.
It’s a good idea to pay attention to any signs of a leak in your pipes, such as a higher than usual water bill or odd stains on your walls or ceilings. Acting quickly is the best way to limit the damage that a leaking pipe can cause.
Are Your Toilets Constantly Running?
This is one of those problems that doesn’t seem like more than a minor annoyance until you take a look at your utility bill at the end of the month. A surprising amount of water can be wasted by a toilet that is just slightly running throughout the day and night. If you hear one or more of your toilets running when it isn’t being used, that’s an issue that should be attended to promptly.
It is commonly the flapper valve in your toilet tank that is to blame for the water running constantly. In many cases, just replacing that valve with a new one will be enough to rectify the situation.
Dripping Faucets Is a Frustrating Issue
When you turn the handle of your faucet into the “Off” position, you expect the water to stop flowing. But what happens when it doesn’t? This is a frustrating issue that, just like the running toilet, can waste a lot of water.
For those with some basic DIY skills, fixing such a problem is usually pretty straightforward. Replacing the washer or O-ring in the faucet will usually bring the dripping to a stop. If not, it might be time for either professional help or the installation of a new faucet.
Low Water Pressure is Often a Symptom
One common problem with a plumbing system is low water pressure, but this is usually a sign that something else is wrong, rather than being the problem itself. For example, if you have a leak in one of your pipes, some of the water pressure will be lost to that leak, and the force of the water coming out of your faucet or showerhead may be compromised.
As a starting point to get to the bottom of this problem, you can test all of the fixtures in the home to see if they are all affected or if the issue is isolated to one area. If the root cause of the low water pressure is a serious plumbing issue, you’ll want to get help from Berico right away to get back on track.
A Burst Pipe is a Plumbing Emergency
Some of the issues highlighted so far – dripping faucets and running toilets, for example – need to be fixed but don’t fall into the category of a plumbing emergency. It’s a different story when it comes to a burst pipe. This type of event needs to be taken care of as soon as possible to limit the damage. Start by turning off the main water supply to bring the flooding to a halt, and then get in touch with the pros.
Dealing with Sump Pump Failure
In a home that relies on a sump pump to avoid flooding issues, the failure of that pump is a serious problem. Unfortunately, this is the type of issue that is usually only noticed once the water is flooding the space, so a prompt response is important. Whether it’s a clogged line in the sump pump system, a power failure, or some other problem, it’s important to get it back in working order before flooding leads to major damage.
If you spot signs of leaking pipes in your home, or if the toilet keeps running and you don’t know why, it’s a good idea to act quickly. Rather than letting the problem get worse, call for plumbing repair from Berico immediately. Knowing that the expert team from Berico is on the job will put your mind at ease, and life will get back to normal in short order.
What is Considered a Major Repair in HVAC?
/in Uncategorized/by William HammerSo, what is it that counts as a major repair in the HVAC world? That’s the question that this article is going to address. If you need help with any kind of Greensboro HVAC issue in your home, take a moment now to contact Berico and get assistance from a friendly and experienced team.
Some Examples of Major HVAC Repair
Perhaps the best way to understand what counts as a major HVAC repair is to go through a few examples of jobs that would fit in that category. Such possibilities are as follows –
The list above is just a partial accounting of what could fall into the category of a major repair. Other potential issues to include here are electrical problems that need to be addressed and blower motor issues. Whatever the case, if it is going to be expensive and take some time to fix, it is surely a major repair.
Deciding Whether to Repair or Replace
When talking about a major repair to an HVAC component, there is always going to be a debate over whether to repair or replace a particular item. In some cases, the cost of the parts and labor for a repair will approach – or even exceed – what it would cost to just start over.
This is the kind of choice that you don’t want to make on your own. It’s best to work directly with a professional to discuss the situation, get a better understanding of the pros and cons on both sides, and then make an informed choice.
No matter what type of HVAC repair you require, there is no better option in the Greensboro area than Berico. Also, if your needs go beyond repair and move into the area of furnace installation or some other type of project, Berico will be able to handle that kind of job as well. Take a moment now to get in touch and learn more!