Furnaces have been around for more than a century. The technology has come a long way since 1919 when the first central heating system was invented and it is constantly improving. If your furnace is more than 10 years old, chances are a new one will be more efficient.

 

Whether your furnace has quit or you’re thinking about getting a new one, here are the advantages of new furnace installation in Greensboro.

 

Modern Furnaces Offer:

 

• Higher Efficiency. Modern furnaces are more efficient than those that are even 10 years old. Advancements in technology raise the AFUE (Annual Fuel Utilization Efficiency) which means that you can heat your home with less heating fuel.
• Lower Heating Bills. Since modern furnaces are more efficient, you’ll notice lower heating bills after your new furnace installation in Greensboro. Whether your furnace uses natural gas, propane, or heating oil, you’ll save money with a new furnace.
• Greater Comfort. Modern furnaces do a better job of making your home feel warm and cozy. By making the most heat possible out of a small amount of heating fuel and distributing it more evenly throughout your home, you achieve a greater level of comfort than you would with an older furnace.
• More Reliable. Reliability is a quality that cannot be replaced with any other feature. When you need your home to be warm on a cold day or night, your furnace just has to work. The automatic pilot is just one way that modern furnaces are more reliable than older ones. Common problems that used to plague furnaces have been nearly eliminated with advancements in engineering.
• Environmentally Friendly. The more efficient your furnace is, the easier it is on the environment. Using less fuel is one way, and the other is emitting less pollution into the air in the form of carbon monoxide and other gases. Modern furnaces are much more environmentally friendly than older ones.
• Automatic Pilot Light. Most recent furnaces have an automatic pilot light. This means that the pilot, the small flame that ignites the heating fuel, does not have to stay lit all the time. An electric component lights the pilot when the thermostat calls for heat. No more waking up cold because the pilot light has gone out and needs to be relit. It also prevents wasted heating fuel that a constantly burning pilot light uses.

 

Ready for a Furnace Upgrade? Contact Berico for an Estimate 

If you want all the benefits of a modern furnace, it’s time for an upgrade. Berico provides reliable furnace installation in Greensboro and the surrounding area. The energy savings alone will help your new furnace pay for itself over time. Consider a free energy audit for your home as well to discover any areas where you’re losing energy. Upgrading your insulation can help you get even more energy savings out of your new furnace.

Call (336) 273-8663 today or request service. Berico can help you save money with a new modern furnace.

Do you have questions about your propane tank? Whether you’re not sure how much propane you have left or your tank is making unusual noises, it is always best to call an expert. If you need a propane delivery or a repair of some kind, your propane supplier can help with these and other propane-related services.

 

Here are some situations when it would be best to call a propane expert.

 

Your Propane Tank is Low or Empty

Whether you know how to read the gauge or not, if you have reason to believe your propane tank is very low or empty, you should definitely call your supplier. It is best to call before the tank runs out completely because the lack of pressure inside the tank can cause problems. The best way to avoid an empty tank is to sign up for automatic deliveries from your propane supplier.

 

Your Tank is Making Sounds

If you hear a knocking sound coming from your propane tank, it indicates a potential problem, such as an imbalance of pressure. A hissing sound typically indicates a leak somewhere. A gurgling or humming sound may mean your tank was overfilled. Whether or not your tank was recently filled or it has been a while, contact your propane supplier if you hear noises.

 

There is a Propane Leak

If you hear a hissing sound or smell a rotten egg smell, you most likely have a leak somewhere in the tank or gas lines. Immediately call your supplier if you notice either of these.

 

Your Furnace is not Working Properly 

If the pilot light won’t stay lit or the furnace is not making warm air, it’s possible your tank may be empty or there may be some other issue. Call your supplier to get this resolved.

 

Berico Provides Propane Delivery and HVAC Services

Not all propane suppliers are HVAC experts, but Berico offers both services so you can get the help you need with one call.

 

Call (336) 273-8663 or schedule propane delivery today.

Back to school season, Labor Day weekend, earlier sunsets–all are signs that cold weather is on the way. And with it comes cooler temperatures and eventually it will be time to make the flip from AC to heat. When’s the best time to discover that there’s a problem with your furnace? The first night temperatures drop low enough that you’re forced to turn it on? Sure, if you want to shiver in the cold while you wait for furnace repair in Greensboro along with everyone else who is facing the same problem.

 

No, the best time to discover a problem with your furnace is well before the weather turns cold. Avoiding unexpected furnace repairs is just one of many reasons you should schedule a tune-up toward the end of summer and early fall.

 

Your Furnace Needs a Thorough Cleaning

One of the most common reasons your furnace may fail to work properly when you first turn it on at the beginning of the cold season is the fact that it is dirty. Dust and soot build up inside your furnace and on the flame sensor causing it to misfire, cycle on and off repeatedly, or not run at all. A dirty furnace is also a fire safety hazard as well as a carbon monoxide risk.

 

A furnace tune-up performed by a professional HVAC service will involve a thorough cleaning of each and every part to ensure optimal performance and proper functioning throughout the heating season.

 

Potential Problems Can Be Discovered Early

A professional furnace tune-up also involves an extensive inspection of the system and parts. This inspection will identify any potential problems that may occur, such as parts that are wearing out or loose, wiring that needs to be tightened or replaced, or other signs of wear and tear that could be a cause for concern. In some cases parts need to be lubricated to prevent friction from causing premature wear or becoming an energy drain.

 

Discovering these problems early not only prevents an inconvenient situation where your furnace fails, but it also prevents a small problem from becoming a bigger problem that is more expensive to fix.

 

You Can Avoid Paying Emergency or After-Hours Fees

If your furnace quits in the middle of the night or on a weekend or holiday, you could be charged extra for repairs. Many HVAC companies are glad to offer emergency and after-hours services, but at higher rates. However, you can most likely avoid these extra fees by being proactive and scheduling preventive furnace repair in Greensboro before the busy season.

 

Of course furnaces, just like any other machine, can malfunction without warning. But this is much less likely to happen if you had a preseason tune-up performed by a reliable HVAC service.

 

Your Furnace Will Run More Efficiently All Season, Saving You Money 

Perhaps the most important reason to get a furnace tune-up is the fact that it can save you money. A clean, well-tuned furnace will run more efficiently and use less energy. If you want to get the maximum energy-efficiency rating out of your furnace, you’ll need to keep it well maintained with the help of an HVAC professional.

 

Whether your furnace runs on natural gas, propane, heating oil, or electricity, you’ll save money by keeping up with regular furnace maintenance. It is recommended that you schedule a furnace tune-up every year prior to the cold weather season.

 

Get Top Quality Furnace Repair in Greensboro From Berico 

Not all furnace tune-ups are the same. Some HVAC companies will do a more thorough job than others, making sure that your system is fully inspected, cleaned, and running properly. Ask to see a copy of the checklist the technician will use to inspect and clean your furnace beforehand. After completing the tune-up your technician should then go back over the checklist with you and explain any potential problems that were identified and the steps that were taken to correct them.

 

Berico goes above and beyond the standard furnace tune-up checklist to ensure every aspect of your furnace is as it should be. You’ll be sure your furnace is ready to keep you warm and cozy this winter.

 

To schedule furnace repair in Greensboro, call (336) 273-8663 or request service. You’ll be glad you made your appointment early for more flexible scheduling.

Are you having problems with your furnace? Sometimes the problem requires just a simple repair. Other times there is a more complex issue with your system that needs to be addressed. How do you know when a furnace is worth repairing and when it should be replaced? There are some common signs that may indicate your furnace is on its last legs. If you notice any or a combination of the following, it may be time to find an HVAC contractor for furnace replacement in Greensboro.

 

Frequent Repairs are Needed

Have you had your furnace repaired more than once this year? One tune up or one repair should be all that is needed in a single heating season. If your furnace continues to have problems even after it has been repaired or tuned up, it may mean that it is time to replace it. Multiple problems in a short period of time suggest that your furnace may not be ready to handle a whole season of cold weather. And by continuing to repair it, you are sinking money into a furnace that may be a lost cause. Invest that money in a new furnace instead.

 

Your Furnace is More Than 15 Years Old

Furnaces have an average life span of 15 to 20 years. If your furnace starts to have problems and it is close to being 15 years old, it may not be worth repairing. Replacing your old furnace will likely operate much more efficiently than your old furnace, which will save you money on your heating bills and help offset some of the cost.

 

You Notice New or Strange Noises Coming From Your Furnace

Have you noticed noises you’ve never heard before coming from your furnace? If you hear a banging, whistling, scraping, squealing, or other noise from your furnace or the vents in your home, it is an indication that your furnace is not operating properly. The problem may be able to be repaired inexpensively. But if the noise indicates an expensive repair, especially if the repair is more than what your furnace is worth, it may be in your best interest to replace it.

 

Rising Energy Bills

Do your heating bills seem to be getting higher and higher each month? Is your propane tank requiring more frequent refills? It could be that your furnace is using up too much energy due to a mechanical problem. It could also be that your furnace is showing signs of age and is not working as efficiently as it once did. A thorough cleaning and a tune up could restore it to efficient operation, but if not, it may be time to replace it with a high-efficiency furnace that could save you money.

 

Cycling On and Off Repeatedly

Does your furnace turn on, run for a few seconds, and turn off again? Does this cycle keep repeating itself without reaching the desired temperature in your home? This is sometimes just an indication that your furnace needs to be cleaned. But it can also indicate a more severe problem that could be expensive to fix. If your furnace seems to be constantly running without sufficiently heating your home, it may be time to consider furnace replacement in Greensboro.

 

Your Home Has Warm and Cool Spots

Do some rooms in your home feel warm and cozy while others are cool and drafty? Uneven heating is another indication that a furnace is not operating as it should. For a new furnace, this can mean that it is simply not big enough to sufficiently heat the total square footage of your home. But if it is an old furnace, and the problem is new, you may need to upgrade to a new furnace.

 

Problems with the Pilot Light

Pilot lights are designed to light automatically in newer furnaces. When the thermostat calls for heat, the pilot light is electrically lit and the furnace fires up. If the pilot light won’t light for some reason, the furnace can’t create heat. Sometimes this is just a problem with the electric starter, but other times it is a deeper issue that can indicate that a furnace is close to breaking down.

 

Experiencing Furnace Problems? Berico Can Help

When your furnace isn’t working properly, it can be frustrating. You may hope that it can be repaired inexpensively, but sometimes an old furnace just needs to be replaced. Berico provides reliable furnace replacement in Greensboro if repair isn’t the best option.

 

Call (336) 273-8663 or request service today. Berico offers specials and financing to make your new furnace more affordable.

With the threat of COVID-19 there are various steps you can take to help to slow the spread, such as washing hands, wearing gloves and masks, and social distancing. Now that people are spending more time than ever in their own homes, indoor air quality is an important issue. Your home should be a safe haven from the risk of contracting the coronavirus. You are probably disinfecting surfaces and frequently touched areas of your home like doorknobs and light switches. But if the virus is airborne, how can you clean the air?

There has been significant research carried out regarding HVAC and COVID 19. It has been questioned whether or not forced air systems can spread the virus, as well as the validity of air purification systems in eliminating the virus. Current findings state that HVAC use is safe and certain air purification systems may be help to reduce the presence of the virus in the air.

How iWave Technology Reduces Pathogens in the Air

When it comes to air purification systems, iWave is one of the most effective products on the market. iWave uses cutting edge technology to reduce pathogens, allergens, particles, smoke, and odors in the air, resulting in cleaner, fresher indoor air. iWave uses natural means to separate particles without releasing any harmful byproducts.

Using patented technology called needle-point bi-polar ionization, the air is infused with positive and negative ions that break down gases into less harmful elements like oxygen and nitrogen and compounds like carbon dioxide and water vapor. The ions are able to remove hydrogen from bacteria, mold, and most importantly viruses, which causes them to die from lack of energy. This is how iWave technology may be able to reduce the presence of COVID-19 in the air.

iWave Works With Your HVAC System to Create a Healthier Environment

Conveniently, iWave can be installed in your duct HVAC system so that the air passes over it every time your heat or AC runs. As the air circulates through your HVAC system and throughout your home it is being purified. Viruses, bacteria, and allergens are being eliminated from the air in a constant cycle, also preventing them from settling on surfaces in your home. You and your family will enjoy a cleaner, healthier home now and in the future.

Low Maintenance for Years of Effective Performance

iWave is self-cleaning with no replacement parts, meaning you can enjoy years of maintenance-free air purification. With no maintenance, the initial cost of the system and installation is the only expense you will have. Other systems include filter and bulb replacement as well as other maintenance. But after iWave is installed you can simply forget about it.

Looking for Information on HVAC and COVID? Berico Can Help

If you’re wondering how your HVAC system can help protect your family from COVID, Berico recommends the following tips:

• Continue to use your HVAC system as you normally would.
• Be sure your HVAC system is properly maintained.
• Add an iWave air purifier to your HVAC system.

When it comes to HVAC and COVID, research supports all of the above. In this time of uncertainty, Berico wants you and your family to be safe and healthy.

If you are in need of HVAC maintenance or you want to request an iWave air purification system, call (336) 273-8663 or request service.